Felt Pinboards: What Size to Get, Where to Hang One, and How to Mount It Without Nails

Terracotta TILE felt pinboard with photos above a console table

A pinboard solves a small problem that never goes away: paper. School notices, a drawing your child is proud of, a photo you meant to frame, the takeout menu. Without a place to go, it ends up on the fridge door or in a pile on the counter.

Felt suits most homes better than cork. It is softer to look at, it comes in color, and it takes pins again and again without crumbling around the pin holes.

One board or modular panels

A single framed board is simple, and fixed. You get one size and one shape, and it usually needs screws.

Modular panels are separate squares you arrange yourself. That matters more than it sounds:

  • You can fit an awkward wall, such as the strip beside a door or the space above a low shelf.
  • You can start with one arrangement and change it when the room changes.
  • Panels are light, so adhesive mounting is realistic.

What size do you need

Start from the wall, not the board. Measure the space, then leave a few inches of bare wall on each side so the board does not look jammed in.

Our sets are six panels, each 17.75 inches square and 3/8 inch thick. Hung edge to edge, six panels cover:

Layout Covers about Good for
2 wide × 3 tall 35.5" × 53.25" A narrow wall, beside a desk
3 wide × 2 tall 53.25" × 35.5" Above a console, sofa, or cube shelf
1 row of 6 106.5" × 17.75" A hallway or along a long desk
Spaced apart Whatever you like A gallery-wall look

Where to hang it

  • Entryway. Keys go in a tray, paper goes on the board. This is the classic family command center.
  • Home office. Hang it where you can reach it from your chair, not behind you.
  • Kids' room or play area. Hang it at the child's eye level, not yours. If they can pin their own work, they will.
  • Above a low shelf or console. Line the bottom edge of the board up with the furniture below so the two read as one unit.

Does a felt pinboard reduce noise

Any felt panel absorbs some sound. How much depends on two things: how much of the wall you cover, and how thick the felt is. Six panels on one wall will soften a room a little. They will not soundproof it. If echo is the main thing you want to fix, cover more wall.

How to mount a felt pinboard without nails

Felt panels are light enough to mount with adhesive tape, which is why they suit renters.

  1. Clean the wall. Wipe away dust and let it dry. Tape sticks to the wall, not to the dust on it.
  2. Mark a level line. Use a level, or a strip of painter's tape, for the bottom edge of the first row. Everything else follows from it.
  3. Start with one corner panel. Get it straight, then build outward.
  4. Press firmly. Hold each panel against the wall for several seconds, over every strip of tape.
  5. Wait before loading it. Give the adhesive time to bond before you pin anything heavy.

Adhesive holds best on smooth, painted walls. On heavily textured walls or fresh paint, test one panel first.

What to pin, and how to keep it from becoming clutter

A board fills up. The ones that stay useful have a rule:

  • Rotate. When a new drawing goes up, an old one comes down. Photograph the old one if it is hard to let go.
  • Give it zones. One panel for the calendar and notices, the rest for things you like looking at.
  • Leave empty space. A board that is two-thirds full looks intentional. A board that is completely full looks like a pile.

Two ways we make them

The GALLERY is designed as a rotating display for kids' artwork: six plain panels that let the drawings do the talking.

The TILE has a pattern pressed into the felt and comes in Terracotta, Tulip, Plaid, and Subway. It suits a home office, an entryway, or a family command center.

Both come as six 17.75-inch panels with mounting tape and wooden pins. Both are lab-tested non-toxic, and the felt is made from recycled material.

Loved by 4,000+ families, and carried by 270+ partner brands and boutiques. See all felt pinboards.